X = 10000 mm
Y = 3100 mm
Z = 1600 mm
HEIDENHAIN iTNC 530
HEIDENHAIN iTNC 530
feed in x – axis
feed in y – axis
feed range Z-direction
rapid motion – x-axis
rapid motion – y-axis
rapid traverse Z-axis
SK 50 , DIN 69871 B50
66 Stk/ pcs
1 Universal milling center SHW-UF 6L, Machine number 6318, Construction year: 2008
Basic machine with the traverse paths:
Machine stand horizontal-longitudinal X= 10.000 mm
Headstock carriage vertical Y= 3.100 mm
Headstock horizontal-transverse Z = 1.600 mm
Compact torsion resistant fabrication with screwed-on, hardened flat guideways.
Telescope steel covers for protection against chips and coolant.
In cast version with hydraulic counterbalance, guided on the machine column via combined roller guideways.
Flat bed design, for fast and safe travels of the machine column in the X axis. The guideway width of 1200 mm combined with compact anti friction roller guideways grant highest precision.
AUTOMATIC UNIVERSAL MILLING HEAD
Tool taper SK 50 DIN 69871
MAIN DRIVE 40 KW
– via integrated CNC system in the machine operation panel
– swivelling on Mounted carrier
CNC-Control Heidenhain iTNC 530
Direct, non-contact measuring via linear scales for high precision production.
According to EN 60204, VBG 4 for 400/230V (±10%) 3 phases, 50 cycles Control voltage 24 V.
Total power approx. 80 kVA, 125 A. The separate control cabinet contains the control units for main spindle and feed motors as well as the freely programmable adjustment control and the switching devices for the additional units. Degree of protection of the control cabinet, the feed motors and fans of the main motor IP 54 and the main motor IP 55. Machine and control cabinet are connected to each other via plug connections, distance corresponding to 6 m cable length. Installed in the cable duct provided by the customers in accordance with the installation plan.
Main drive and milling head adapter: Circulating oil lubrication
Main spindle: Permanent grease lubrication
Guideways and recirculating ball screws: Central pulse lubrication
OPERATORS PLATFORM WITH INTEGRATED CNC CONTROL PANEL
travelling in X-direction, mounted at the side of the machine column. At the side facing the work area, a door with electrical safety interlock and window is provided.
– Chain magazine for tools pcs. 66
– Max. tool dia with full magazine mm 125
– Max tool dia with free neighbor pockets mm 250
– Max. tool length mm 400
– Max. tool weight kg 25
– Max. load moment Nm 40
– Tool taper SK 50 DIN 69871
– Spindle position for tool change horizontal
– Fixed location coding
– Blow-out of the tool taper with compressed air after each tool change
RADIO MEASURING PROBE
EXTERNAL ELECTRONIC HAND WHEEL
OIL COOLING UNIT
– Rotary Table
– Clamping Plates
– 3-Sided Splash Guard