UniForce 6L (2)

UniForce 6L (2)

Machine no.:

2024-0024

Roads:

X = 10000 mm
Y = 3100 mm
Z = 1600 mm

Control:

HEIDENHAIN iTNC 530

Construction year:

2008

X-travel

10000 mm

Y-travel

3100 mm

Z-travel

1600 mm

control

HEIDENHAIN iTNC 530

condition

partly overhauled

feed in x – axis

36000 mm/min

feed in y – axis

24000 mm/min

feed range Z-direction

24000 mm/min

rapid motion – x-axis

36000 mm/min

rapid motion – y-axis

24000 mm/min

rapid traverse Z-axis

24000 mm/min

tool taper

SK 50 , DIN 69871 B50

tool magazin

66 Stk/ pcs

1 Universal milling center SHW-UF 6L, Machine number 6318, Construction year: 2008

 

Basic machine with the traverse paths:

Machine stand horizontal-longitudinal             X= 10.000 mm

Headstock carriage vertical                            Y= 3.100 mm

Headstock horizontal-transverse                     Z = 1.600 mm

  

MACHINE Stand

Compact torsion resistant fabrication with screwed-on, hardened flat guideways.

Telescope steel covers for protection against chips and coolant.   

 

HEADSTOCK Carriage

In cast version with hydraulic counterbalance, guided on the machine column via combined roller guideways.

 

MACHINE BED

Flat bed design, for fast and safe travels of the machine column in the X axis. The guideway width of 1200 mm combined with compact anti friction roller guideways grant highest precision.

 

AUTOMATIC UNIVERSAL MILLING HEAD

Tool taper SK 50 DIN 69871

 

MAIN DRIVE 40 KW

 

CENTRAL CONTROL

– via integrated CNC system in the machine operation panel

– swivelling on Mounted carrier

 

CNC-Control Heidenhain iTNC 530

 

MEASURING SYSTEMS

Direct, non-contact measuring via linear scales for high precision production.

 

ELECTRICAL EQUIPMENT

According to EN 60204, VBG 4 for 400/230V (±10%) 3 phases, 50 cycles Control voltage 24 V.

Total power approx. 80 kVA, 125 A. The separate control cabinet contains the control units for main spindle and feed motors as well as the freely programmable adjustment control and the switching devices for the additional units. Degree of protection of the control cabinet, the feed motors and fans of the main motor IP  54 and the main motor IP 55. Machine and control cabinet are connected to each other via plug connections, distance corresponding to 6 m cable length. Installed in the cable duct provided by the customers in accordance with the installation plan.

 

 

 LUBRICATION

Main drive and milling head adapter:              Circulating oil lubrication

Main spindle:                                                    Permanent grease lubrication

Guideways and recirculating ball screws:       Central pulse lubrication

 

 

OPERATORS PLATFORM WITH INTEGRATED CNC CONTROL PANEL

travelling in X-direction, mounted at the side of the machine column. At the side facing the work area, a door with electrical safety interlock and window is provided.

 

ATC

– Chain magazine for tools                              pcs.  66

– Max. tool dia with full magazine                    mm 125

– Max tool dia with free neighbor pockets       mm 250

– Max. tool length                                             mm 400

– Max. tool weight                                            kg     25

– Max. load moment                                        Nm   40

– Tool taper                               SK 50             DIN 69871

– Spindle position for tool change                    horizontal

– Fixed location coding

– Blow-out of the tool taper with compressed air after each tool change

 

RADIO MEASURING PROBE

 

EXTERNAL ELECTRONIC HAND WHEEL

 

OIL COOLING UNIT

 

COOLANT TANK

 

DOCUMENTATION

 Not included:

       Rotary Table

       Clamping Plates

       Swarf Conveyor

 

       3-Sided Splash Guard 



* Required fields
By submitting the contact form, you agree that your data will be used to process your request. (For more information and revocation instructions, see the Privacy Policy ).